1. Preparation before maintenance

Before performing pile driver maintenance, we need to make the following preparations:

1. Safety check: Make sure the equipment is in a stopped state and cut off the power or gas supply. Check all moving parts of the equipment, safety valves and circuits for proper operation.

2. Cleaning inspection: Clean all pile driver parts. Clean components such as rods, tanks and coolers and remove any corrosive material and sediment.

3. Lubrication inspection: Check all lubrication points, including oil pipes, oil pumps and oil tanks. Make sure the pile driver is filled with the correct type of lubricant before operation.

2. Daily maintenance details

1. Change lubricating oil

Lubricating oil is a commonly used lubricating substance for pile drivers and must be kept clean and at normal levels. Lubricating oil usually needs to be changed every 500 hours.

2. Check the oil filter

Before changing the lubricating oil, check whether the oil filter needs cleaning or replacement. The filter prevents dust and debris from entering the interior of the equipment and preventing damage to the engine and lubricating belts.

3. Clean the radiator

Accumulated dust and dirt on the radiator can prevent the radiator from functioning properly and cause the device to overheat. Therefore, we need to clean the radiator regularly to ensure the normal operation of the equipment.

4. Check wires and cables

Check that wires and cable connections are tight and look for damage or wear. If there is, it needs to be replaced in time to avoid damaging the equipment.

3. Strict maintenance system

Pile driver maintenance needs to comply with the following systems:

1. Establish maintenance files: record the time of each maintenance, maintenance personnel, maintenance content, equipment status and other information, and check the files regularly.

2. Develop a maintenance plan: Develop a maintenance plan based on equipment operating time and working environment, and include it in the equipment safety management document.

3. Strictly implement maintenance: Strictly implement equipment maintenance in accordance with maintenance plans and operating procedures, and handle equipment failures in a timely manner.

Pile driver maintenance is an important part of the long-term use of the equipment, and we need to take maintenance work seriously.